Batboard

What is the max current draw you can have on pin 13 (switched batt +) on a cdm 1550 accessary connector. I am wanting to hook a zetron model 25 paging encoder up to a cdm 1550 and didn't want to run a power cable all the way back to the power supply. The encoder draws 2.5 amps.

Thanks in advance

somewhere under 1A (probably closer to 500ma) IIRC, safer to tap the power feed to the CDM and fuse appropriately.

Ok thanks for the reply

Pin 13 of the accessory connector (J0501-8) is supplied power from U0611, a LM2941.
The LM2941 is rated for 1A.
There is also a 0 ohm resistor/jumper (R0533) in line between U0611 and J0501.