Batboard

Has anyone interfaced a GTR8000 with a Siemens Hipath 4000 system via TRC (tone remote control)? I'm having issues with determining which port on the GTR8000 to actually access via TRC. I'm thinking it's a four wire configuration as opposed to the six wire configuration the Hipath usually uses. I'm running conventional not mixed mode if that matters. Any thoughts would be welcome.

Is the GTR8000 a conventional BR configuration? If so, there is an RJ45 wireline port inside the unit that your TRC equipment interfaces to. TRC configuration is performed in the CSS for the GTR8000. It's a very simple configuration.