Need codeplug for ASTRO SPECTRA VHF

This forum is for discussions regarding all aspects of Motorola radio programming, including hardware, computers, installation and use of RSS/CPS, firmware upgrades, and troubleshooting. There are subforums for discussions of codeplugs, and also for software/firmware release notes and issues.

Moderator: Queue Moderator

Post Reply
dmurman
New User
Posts: 15
Joined: Thu Feb 28, 2008 7:08 am
What radios do you own?: MTS2000, Spectra, P1225, MCS20

Need codeplug for ASTRO SPECTRA VHF

Post by dmurman »

I have an ASTRO Spectra VHF model T04KLH9PW3AN-UCM that has the HHCH A3 control head in the codeplug but I don't have an HHCH A3 head. I would like to use this radio with the A5 control head. I am in need of a codeplug for that model number that has the A5 control head. Vocon is 1MEG and does 2.5khz.


Thanks;
jmr061
was KB9KST
Posts: 3176
Joined: Fri Sep 14, 2001 4:00 pm

Re: Need codeplug for ASTRO SPECTRA VHF

Post by jmr061 »

Astros use W series head not A series just as an FYI.

If you manage to get a plug you also need to change out the interface board on the radio. The W3 uses a different one than the W4/5/7/9.

Jason
Post Reply

Return to “Radio Programming”