Page 1 of 1
error code 1/82
Posted: Thu Nov 06, 2014 12:10 pm
by STEVE W
What would cause an XTS5000 to come up with error code 01/82 just on a read code plug, this has happened twice and it is back at MSS now and will have to be shipped back to depot Thanks
Re: error code 1/82
Posted: Thu Nov 06, 2014 12:31 pm
by jmr061
I would guess hardware failure.
Re: error code 1/82
Posted: Fri Nov 14, 2014 11:23 pm
by MTS2000des
if writing a known good codeplug doesn't fix it, then an EEPROM failure will usually cause a FAIL 01/82. Off to the depot for a fresh VOCON board, while you still can!