I have been using Toolkit to reprogram 8 channel GP300's to 16. I have one that will absolutely not work though. I am assuming that I need to set it up through Hex Editing for it to work. I am really not all that familiar with how Hex Editing works. I have read the instructions on the site, but, unfortunately with my lack of experience with this, I really don't understand all of it. If someone could help me through it I would appreciate it.
Thanks,
Streaker
GP300 8 to 16 Channel
Moderator: Queue Moderator
gday streaker,
use this link from the Batlabs site.
http://www.batlabs.com/hoffisgp2.html
It is in the model specific link, gp300 etc
there are 2 pages & this is the best one for what u want.
Use hexedit (links on same page) and edit the gp300.mdf & gp300.exe file. It is fairly self explanatory. This will allow easy expansion of channels etc.
I have done it myself and it will work no worries. It is much easier than editing the codeplug directly.
mike.
use this link from the Batlabs site.
http://www.batlabs.com/hoffisgp2.html
It is in the model specific link, gp300 etc
there are 2 pages & this is the best one for what u want.
Use hexedit (links on same page) and edit the gp300.mdf & gp300.exe file. It is fairly self explanatory. This will allow easy expansion of channels etc.
I have done it myself and it will work no worries. It is much easier than editing the codeplug directly.
mike.