Part # HT90/440 mic plug

The General forum is where users can discuss any topic regarding Motorola communications equipment - hardware, software, etc. There are also several focused forums on this board, so please take the time to ensure that your questions doesn't fall into one of those categories before posting here!

Moderator: Queue Moderator

Post Reply
N3YYB
Posts: 1
Joined: Sun Dec 23, 2001 4:00 pm

Post by N3YYB »

I am building hetset adapters for Heil headsets to use on HT90 radios and can't find the part # of the plug which fits the 4-Contact female #RPX4630A on top of the radio.

Thanks
User avatar
Monty
Administrator
Posts: 2613
Joined: Tue Sep 04, 2001 4:00 pm

Post by Monty »

Hi:

As Motorola goes on, they do NOT supply
the Mic plug for HT90's or HT440's.

Only way you can get the Plug is with the
Cable already attached. Sad, but true.

There are ways of " Fixing" the Old mic plugs
if you are mechanicaly handy by seperating
the Crimp on the Bottom, and then Cut of the
Top, and the Solder on a Cable Clamp on the
top of the old one.



Monty
Post Reply

Return to “General Motorola Solutions & Legacy Radio Discussion”