Page 1 of 1
antenna question......
Posted: Mon Jun 23, 2003 11:30 am
by svfd1231
Hey folks I have a question.....I have an antenna and I discovered I need a oring that goes on it and some other type of rubber gasket for it. Any idea what I am looking for and where I can get it?
Jacob
Posted: Mon Jun 23, 2003 4:08 pm
by nmfire10
Well, I'm thinking that it just might help if we new what kind of antenna and what kind of mount. Thats like saying "I have this engine in my car. Can you tell me what gasket it needs?"
Posted: Mon Jun 23, 2003 6:14 pm
by svfd1231
well I am not too sure on the antenna type its just a vhf antenna 146-160 megahertz, its a permanent mount where you drill a hole and run the cord and has the 3/4 inch hole. Not sure if this helps. I will find out tomorrow what kind exactly it is.
Jacob
Posted: Mon Jun 23, 2003 6:30 pm
by nmfire10
It's probably a normal NMO mount. However the gasket is going to be specific to the make/model/brand of the antenna. The size of the base determines the size of the gasket. Many of them are pretty damn near the same though.
Posted: Tue Jun 24, 2003 7:02 pm
by svfd1231
well the guy I got the antenna from was not at the meeting tonight so I haven't found out the type yet.
Jacob
Posted: Wed Jul 16, 2003 1:22 pm
by tiredfireman
Pop on down to your local NAPA auto parts store (or regional equivalent) with your unit and ask for an "O" ring that is a snug (not tight) fit. Best case, they will have individual units for sale, worst is you buy a package use what you need and put the rest away (where you'll never find 'em when you need 'em). I've used o-rings on several re-installations (old mounts) and never had a problem. If using the "Motorola" type mounts, where the seal is recessed in the mount, fit will be critical, so measure first, and take it with you to the shop.