Systems Saber III error code & out of band programming

The General forum is where users can discuss any topic regarding Motorola communications equipment - hardware, software, etc. There are also several focused forums on this board, so please take the time to ensure that your questions doesn't fall into one of those categories before posting here!

Moderator: Queue Moderator

Post Reply
User avatar
oh2lak
Posts: 237
Joined: Sun Nov 25, 2001 4:00 pm

Post by oh2lak »

Hi all.

I have a set of Systems Saber III VHF radios, and one of them seems to be somehow defective, as before I initially programmed it, it gave ERROR 0B at the 1 time out of 10 when it even booted. After initially reading the codeplug, RSS complained that the plug contained a lot of errors.
I then read the codeplug from a similar radio (H43TUK5170CN) and programmed it to the defective one and it started working, but it still shows ERROR 03 now and then.

The model specific page of Systems Saber and its error code page points to saber error codes, which do not match these error messages. Are they the same anyway, regardless in which format they appear on the screen?

Another thing, is there any way to program a radio for 148-174 lower than 147? Would be nice to get it to 2m 145MHz..

73
Erik
Top
10-95
Fail 001 "Brain out of Lock"
Posts: 1595
Joined: Fri Oct 12, 2001 4:00 pm

Post by 10-95 »

Check your private messages


Thanks
10-95

<font size=-1>[ This Message was edited by: 10-95 on 2002-01-02 13:40 ]</font>
Top
Post Reply

Return to “General Motorola Solutions & Legacy Radio Discussion”