Posted: Tue Jan 01, 2002 3:50 pm
Hi all.
I have a set of Systems Saber III VHF radios, and one of them seems to be somehow defective, as before I initially programmed it, it gave ERROR 0B at the 1 time out of 10 when it even booted. After initially reading the codeplug, RSS complained that the plug contained a lot of errors.
I then read the codeplug from a similar radio (H43TUK5170CN) and programmed it to the defective one and it started working, but it still shows ERROR 03 now and then.
The model specific page of Systems Saber and its error code page points to saber error codes, which do not match these error messages. Are they the same anyway, regardless in which format they appear on the screen?
Another thing, is there any way to program a radio for 148-174 lower than 147? Would be nice to get it to 2m 145MHz..
73
Erik
I have a set of Systems Saber III VHF radios, and one of them seems to be somehow defective, as before I initially programmed it, it gave ERROR 0B at the 1 time out of 10 when it even booted. After initially reading the codeplug, RSS complained that the plug contained a lot of errors.
I then read the codeplug from a similar radio (H43TUK5170CN) and programmed it to the defective one and it started working, but it still shows ERROR 03 now and then.
The model specific page of Systems Saber and its error code page points to saber error codes, which do not match these error messages. Are they the same anyway, regardless in which format they appear on the screen?
Another thing, is there any way to program a radio for 148-174 lower than 147? Would be nice to get it to 2m 145MHz..
73
Erik