Batboard

How Many Techs Have Used Liquid Tape.

We Found It To Be Great.We Solder But
Salt Is Bad So WE Found Liquid Tape
Used First Before Heat Shrink Was Super.

i have it works great.

But i it always seems to spill or the top get gunky and unabel to use the nexte time

I use it regularly, but only in conjunction
with tape, heatshrink, stacons, or scotchloks.
It also works well when weatherproofing RF connectors.
J.B. AD6WX

works good but i find it a little thin so i mostly use silicone sealant and heat shink together it works very well no failures yet and i live wisconson also known for its share of salt induced rusted out beaters (cars) a so much fun

we tried it once..it was messy, the rest of the bottle hardened very quickly..the seal it made was reasonable but hard to determine if all the air was forced out of the connection or if bubbles were present

bottom line..it was not good enough to replace glue filled heat shrink for watertight connections

....Z

"Cold shrink" tape works much better. It goes on thick, is watertight and doesn't crack. It also is clean to work with.