Page 1 of 1
problem loading secure code into my astrosaber 2
Posted: Sun Jul 27, 2003 4:21 pm
by sglass
ok
this is the same loader I use for system sabers
it'san older des kvl model#t3020ax
saber is a model h04rdf9pw7an
flashcode: 10000010000007
kg1: des-xl
Posted: Sun Jul 27, 2003 4:24 pm
by Julian
.
Posted: Sun Jul 27, 2003 8:34 pm
by sglass
I changed the question
Re: problem loading secure code into my astrosaber 2
Posted: Sun Jul 27, 2003 10:16 pm
by k4wtf
sglass wrote:ok
this is the same loader I use for system sabers
it'san older des kvl model#t3020ax
saber is a model h04rdf9pw7an
flashcode: 10000010000007
kg1: des-xl
It is my understanding that you will require a different (newer) keyloader to load the Astro. I am pretty sure that the T3011DX will do the trick. My T3011CX was upgraded to DX for just this reason.
Additionally, according to
http://www.batlabs.com/encrypt.html the T3020AX would be a first revision DES keyloader and not a DES/DES-XL Securenet keyloader and it also states "You will need a D version to program some of the newer radios."
--
John
Posted: Sun Jul 27, 2003 10:53 pm
by Pj
You WILL need a 3xxxDX loader or better for the Astro line. It will still load a key for the older radios. I believe your KVL was upgraded from a BX to a DX when we got our XTS. It will load the older secure chips (analog sabers/spectras) and the newer UCM modules that we have in our new Astro Spectra. Also, be sure you enable the secure option in RSS (everyone forgets), or it will never load a key.
ok
Posted: Mon Jul 28, 2003 7:36 am
by sglass
the question then is-can I upgrade my keyloader?
and what should it cost?
Posted: Fri Oct 29, 2004 6:55 pm
by sglass
ah
the value of searching
::)