Minitor question

The General forum is where users can discuss any topic regarding Motorola communications equipment - hardware, software, etc. There are also several focused forums on this board, so please take the time to ensure that your questions doesn't fall into one of those categories before posting here!

Moderator: Queue Moderator

Post Reply
User avatar
gafd6913
Posts: 91
Joined: Fri Oct 05, 2001 4:00 pm

Post by gafd6913 »

Had another question about the minitor I. The one that I carry has the three tone slots for the NLN7834A / NLN8503A
reeds. The pager will alert fine for A/B paging but it wont for B/C or Long C. Any suggestions? BTW, the B tone and C tone are the same (524.6).
Tim Coleman, EMD/EMT-I
Burke EOC - Telecommunicator - C-10
Glen Alpine Fire Dept. - First Responder - 6913
Top
User avatar
thgiz
Posts: 156
Joined: Mon Dec 10, 2001 4:00 pm
What radios do you own?: HT1250LS+ & CDM1250

Post by thgiz »

the pager has jumpers on the board that need to be cut/closed to configure it. not sure what jumpers do what on a I though
Top
Post Reply

Return to “General Motorola Solutions & Legacy Radio Discussion”