Maxar 50 PL/DPL

The General forum is where users can discuss any topic regarding Motorola communications equipment - hardware, software, etc. There are also several focused forums on this board, so please take the time to ensure that your questions doesn't fall into one of those categories before posting here!

Moderator: Queue Moderator

Post Reply
User avatar
EC-7
Posts: 139
Joined: Mon Sep 24, 2001 4:00 pm

Post by EC-7 »

Does anyone know how to change the diodes on a Maxar 50 for different pl's or dpl's. I think mine is dpl. There is no info on the model specific page. A list of what diodes to instal or cut would be helpful.
Top
User avatar
Tom in D.C.
Posts: 3859
Joined: Tue Sep 04, 2001 4:00 pm
What radios do you own?: Progreso soup can with CRT

Post by Tom in D.C. »

Mark: I have the sheets which give the diode data for both types of setups. Send me an e-mail with your snail mail address and I'll send you copies.

Watch out for what diode is what; some are numbered left to right and others are set up right to left. You have to be VERY careful as to which ones you cut/solder, and there are some diodes in the line which look like PL/DPL diodes but are not involved.

Tom, W2NJS
[email protected]
Top
Post Reply

Return to “General Motorola Solutions & Legacy Radio Discussion”