Page 1 of 1
Posted: Thu Jan 24, 2002 12:36 am
by EC-7
Does anyone know how to change the diodes on a Maxar 50 for different pl's or dpl's. I think mine is dpl. There is no info on the model specific page. A list of what diodes to instal or cut would be helpful.
Posted: Thu Jan 24, 2002 5:05 am
by Tom in D.C.
Mark: I have the sheets which give the diode data for both types of setups. Send me an e-mail with your snail mail address and I'll send you copies.
Watch out for what diode is what; some are numbered left to right and others are set up right to left. You have to be VERY careful as to which ones you cut/solder, and there are some diodes in the line which look like PL/DPL diodes but are not involved.
Tom, W2NJS
[email protected]