Batboard

hi guys im trying to figure this out but no luck, on my gp300 there was a setting called signaling squelch, so you would hear nothing on that channel unless you push the mon button or our tones go off, but i can not find it in the programing for a 1550 (r6.00) what i am trying to do is put a second primary dispatch channel on my radio so at night i will not hear all the talk from other departments unless our tones go off,
any help woud be great

thanks jeffrey
Newton Twp Fire & Ems

I'm farely sure that signalling squelch you're talking about in the GP300s was just Call Alert w/ Voice exclusively on the channel.

In the HT1550XLS, the equivalent should be setting Personality -> Signalling -> Signalling Squelch to "And".