Increasing HT-1000 to 48 Channels

The General forum is where users can discuss any topic regarding Motorola communications equipment - hardware, software, etc. There are also several focused forums on this board, so please take the time to ensure that your questions doesn't fall into one of those categories before posting here!

Moderator: Queue Moderator

Post Reply
bundy125
Posts: 102
Joined: Fri Sep 14, 2001 4:00 pm

Post by bundy125 »

I believe in posts many moons back, I read one that indicated a 16 channel Ht-1000 could be increased to 48 channels by using a MT-2000 codeplug. Anyone out there have specfics on how to do this (If my memory is correct)?

Thanx,

Bundy
Top
metro121
Posts: 441
Joined: Wed Oct 10, 2001 4:00 pm

Post by metro121 »

Yes it is posible to convert a 16 channel HT1000 to a 48 channel by using an MT2000 codeplug.
But you also need to use an MT2000 command board to put the codeplug into or you wil end up with a 48 channel paper weight.
Top
User avatar
alex
Administrator
Posts: 5762
Joined: Mon Sep 03, 2001 4:00 pm

Post by alex »

Check out this topic below.

http://batboard.batlabs.com/viewtopic.p ... forum=1&14

Should answer some of your questions.

-Alex
Top
bundy125
Posts: 102
Joined: Fri Sep 14, 2001 4:00 pm

Post by bundy125 »

Hi Alex,
Followed the link and it did enlighten me. Appreciate it.

Bundy
Top
User avatar
alex
Administrator
Posts: 5762
Joined: Mon Sep 03, 2001 4:00 pm

Post by alex »

No problem :smile:

-Alex
Top
Post Reply

Return to “General Motorola Solutions & Legacy Radio Discussion”