Page 1 of 1
Posted: Sun Feb 24, 2002 8:10 am
by bundy125
I believe in posts many moons back, I read one that indicated a 16 channel Ht-1000 could be increased to 48 channels by using a MT-2000 codeplug. Anyone out there have specfics on how to do this (If my memory is correct)?
Thanx,
Bundy
Posted: Sun Feb 24, 2002 8:15 am
by metro121
Yes it is posible to convert a 16 channel HT1000 to a 48 channel by using an MT2000 codeplug.
But you also need to use an MT2000 command board to put the codeplug into or you wil end up with a 48 channel paper weight.
Posted: Sun Feb 24, 2002 8:33 am
by alex
Check out this topic below.
http://batboard.batlabs.com/viewtopic.p ... forum=1&14
Should answer some of your questions.
-Alex
Posted: Sun Feb 24, 2002 6:09 pm
by bundy125
Hi Alex,
Followed the link and it did enlighten me. Appreciate it.
Bundy
Posted: Sun Feb 24, 2002 6:21 pm
by alex
No problem
-Alex