Page 1 of 1
Posted: Mon Mar 04, 2002 10:20 pm
by n_zero_ndp
Does the DeskTrac require special RSS? Can anyone please give me any other info? Didn't see much reference to it on the BatLabs site.
TIA
Posted: Mon Mar 04, 2002 10:51 pm
by Monty
Hi:
If you desire accessing all the features
of the Desktrac, you will need the Desktrac
SW Ver 3.04.00 or higher.
If all you want to do is change freq, you
can do that with Maxtrac Software, but
yo have to access the radio direct to do
it.
MS
Posted: Mon Mar 04, 2002 11:11 pm
by n_zero_ndp
Thanks Monty...
Thought it may be accessible with MaxTrac RSS. So it's just a MaxTrac in a fancy box?
Ken in KC
Posted: Tue Mar 05, 2002 12:06 am
by Will
Monte, you forgot to mention the three position switch on the front panel below the local builtin mic to switch between the two radios and the remote adapter's programming ports.
Use the Maxtrac RSS thru the mic jack on the front panel of the DeskTrac and use the switch to select which radio chassis to read and program.
Posted: Tue Mar 05, 2002 9:14 am
by n_zero_ndp
Thanks to you both.
Found what I thought to be a great deal on one.
TNX for the info.
Ken in KC