Batboard

Posted: **Sun Oct 31, 2004 3:41 pm**

does any one know how I can correct a ERR 0 81 on a saber 3
thanks

Posted: **Sun Oct 31, 2004 10:14 pm**

http://www.batlabs.com./sabreror.html

try and reprogramm the radio ..

Posted: **Tue Nov 02, 2004 6:01 pm**

Ok I created a new codeplug and still no luck. Is this a repairable radio?

Posted: **Tue Nov 02, 2004 6:35 pm**

it should be . there may be a problem with the front shield , have you checked and made sure all of the ribben cables are in ??? also are you using a stable programming platform ??? cables , rib , computer , have you tryed just programming 12 channels into it ?? how many channels are you trying to program into it ??

i have a saber II/III that will crash if i load more than 12 channels in it ..the memory in the front shield is bad , it will still work , but its a 12 channel radio , with a display .

without having the radio in my hand , its kind of a big guessing game ..

good luck ..

Posted: **Fri Nov 05, 2004 11:04 am**

What kind of a saber III is it, I have seen an error like that if I can remember right when I used Saber RSS on a System Saber III by accident.

Posted: **Fri Nov 05, 2004 3:49 pm**

Saber 3, H43QXK7139CN
You mentioned the Wrong RSS, Its possiable,I got the unit with SYSSABER and SABER RSS. Any thoughts?

Posted: **Fri Nov 05, 2004 3:51 pm**

Make sure you are NOT running the RSS in Windows, that can cause this kind of problem.

Frank

Batboard

SABER ERROR CODE 0-81

SABER ERROR CODE 0-81