HT 1000/XTS3000 rack charger parts list

firecomm · Post by **firecomm** » Sat Oct 01, 2005 2:13 pm

I'm looking for a parts list for the NTN1177 rack charger for the HT1000 / XTS3000. I need to replace a few things. If anyone can help out, that would be great.

Thanks.

dittrimd · Post by **dittrimd** » Mon Oct 03, 2005 10:10 am

I was looking for something similar not to long ago. I ended up disassembling my charger and finding the parts. There are not to many and they all had a part number I could look up online. Motorola online would give me the latest part number and I ordered it with out a problem. Hope this helps. Good luck.

Mark

chipjumper · Post by **chipjumper** » Fri Nov 10, 2006 11:14 am

Does anyone know if the HT1000 rack charger (110v) can be powered by 12V???

In other words, is the actual charging unit run off of 12V provided by a 110V to 12V power supply?

n7maq · Post by **n7maq** » Fri Nov 10, 2006 2:35 pm

chipjumper wrote:Does anyone know if the HT1000 rack charger (110v) can be powered by 12V???

In other words, is the actual charging unit run off of 12V provided by a 110V to 12V power supply?

The P/S on the 1177 is 12, or 16 volt output. IIRC they are using the 12 volt side.

Jim.

chipjumper · Post by **chipjumper** » Sun Nov 12, 2006 7:05 pm

Interesting; I suppose I'll take her apart and measure the voltage output to see if its 16 or 12.

chipjumper · Post by **chipjumper** » Tue Nov 14, 2006 8:35 pm

Alright so I took it apart and found that there are three wires coming from the power supply. A red, black, and blue.

The red and black measured +12V and the red and blue measured -10V.

I have no clue what the blue is for; has anyone ever just powered this up with +12V?

I plan on putting this inside of a fire engine hooked up to 12V.