HT1250 RIB to Radio pinout

dxon2m · Post by **dxon2m** » Sun Oct 09, 2005 11:38 am

I'm looking for a HT1250 RIB to radio programming cable pinout.

I searched the board before and someone stated that the diagram in the batlabs site is incorrect, maybe someone can point me to the right direction?

Thnx

bcooper · Post by **bcooper** » Sun Oct 09, 2005 5:04 pm

http://www.batlabs.com/images/1550svc.gif
There is nothing wrong with this pinout. It works great for me on HT750 & HT1250 radios. The "ribless" cable is wrong. Perhaps that is what you read.

firemanfox · Post by **firemanfox** » Tue Feb 28, 2006 12:12 pm

is it possible to not use the connector for the radio test when building this cable? And if it is does it change the pinout at all?

bcooper · Post by **bcooper** » Tue Feb 28, 2006 4:46 pm

You do not need to wire in the connector for the test set. The pinout stays the same.

Tango · Post by **Tango** » Tue Feb 28, 2006 6:16 pm

SIMPLIFY...