Page 1 of 1
Astro Saber
Posted: Sat Oct 29, 2005 1:46 pm
by racerman1cars
What is that pin for on the back below the screw that holds the spkr/mic on?
Posted: Sat Oct 29, 2005 4:30 pm
by MRFLASHPORT
racerman1cars,
Its a connection point for the Astro Saber convertacom.
Posted: Sun Oct 30, 2005 7:29 am
by N4KVE
It is the connection for the antenna for a PS speaker mike, or convertacom. Either way it's RF. GARY N4KVE
Astro Saber
Posted: Sun Oct 30, 2005 4:33 pm
by racerman1cars
Are you talking about the gold part? the thing I am refering to is silver and spring loaded! Thanks.
Posted: Sun Oct 30, 2005 5:00 pm
by Johnno
The spring loaded thing....
I believe you will find when this pin is depressed the RF output switches from the antenna fixed on top of the unit to the external antenna output above the accessory pins. Basically it's a switch that is activaed by placing the HH in a AVA/SVA or when you use a public safety mic.
Hope this helps.
John.