If your interested......
Leo-Mac Two Way Radio Service, Inc. is currently looking for radio and lighting installer. Experience is preferred but ability to learn is equally important. This position requires someone of high integrity by its very nature. You must have a good work history to be considered for this job. The ability to get along with customers and coworkers is vital. The duties will include installing 2 way radios, scanners, repeaters, barlights and running cables throughout vehicles. Knowledge of large trucks, such as fire, ambulance, and dump trucks a plus. This job requires a certain amount of tools which you must possess and be handy with. Ladder climbing will be involved on a regular basis. Normal business hours of 8:30 to 5:00 M-F are rarely exceeded but there may be occasions where extra hours are necessary. Reliable transportation and ability to be at customer location at start time is a must. If you feel you have what it takes please fax your resume to 315-463-2741.
Leo-Mac Two Way Radio Service, Inc.
Location: E. Syracuse
Available Immediately FT
****PLEASE NO EMAILS TO ME, QUESTIONS CAN BE ANSWERED @ [email protected]******
http://www.leomac.com
- Board index Focused Discussion Vehicle Radio Installs
- Search
-
- It is currently Sun Jun 15, 2025 2:42 pm
- All times are UTC-08:00
OT: Looking for a Good Installer in CNY
This forum is dedicated to helping people with questions about installing radio equipment in vehicles. This can include antenna installs, electrical wiring questions/problems, and mounting systems. Pictures of installs are welcome.
Note: Discussions regarding lighting, sirens, and other equipment now has its own forum in the 'off-topic' section below.
Note: Discussions regarding lighting, sirens, and other equipment now has its own forum in the 'off-topic' section below.
Moderator: Queue Moderator
Return to “Vehicle Radio Installs”
Jump to
- Administrative
- ↳ Announcements and Forum News
- ↳ Forum Rules
- General
- ↳ General Motorola Solutions & Legacy Radio Discussion
- ↳ Radio Programming
- ↳ Software & Firmware Releases & Issues
- ↳ Codeplug Information
- ↳ NFPA 1802 Discussion
- Current Motorola Solutions Public Safety / Astro Product Line
- ↳ APX NEXT
- ↳ APX Series Subscribers
- ↳ ASTRO Series (Astro Saber, Spectra, XTS3000/3500) Subscribers
- ↳ ASTRO25 Series (XTS/XTL 1500/2500/5000) Subscribers
- ↳ ASTRO Experimental - How to do things a little out of the box
- ↳ ASTRO Products Feature Requests & Future Speculation
- ↳ Legacy Batboard Motorola ASTRO (VSELP/IMBE/AMBE) Equipment Forum
- Current Motorola Solutions Professional / Business Product Lines
- ↳ MotoTRBO ION Devices
- ↳ Motorola CP/CM Series Subscribers
- ↳ MotoTRBO Portables and Mobiles (4xxx/6xxx) 1.0 Series Subscribers
- ↳ MotoTRBO Portables and Mobiles (3xxx/5xxx/7xxx/SL) 2.0 Series Subscribers
- ↳ MotoTRBO Repeaters, Trunking, and Site Infrastructure
- ↳ MotoTRBO 3rd Party Application Discussion & Support
- ↳ MotoTRBO/Business Products Feature Requests & Future Speculation
- ↳ Experimental - How to do things a little out of the box
- Motorola System Infrastructure (Consoles, Base Stations, Repeaters, Trunking, etc.)
- ↳ Smartnet/Smartzone/Project 25 (Phase I/II) Systems
- ↳ Base Stations, Repeaters, General Infrastructure
- ↳ Consoles
- ↳ Experimental - Mods, and how to do things a little out of the box
- ↳ Infrastructure Product Feature Requests & Future Speculation
- Focused Discussion
- ↳ Motorola Digital and Voice Paging
- ↳ Converting Motorola Equipment to 900MHz Amateur
- ↳ Test Equipment & RF Equipment Alignment
- ↳ Vehicle Radio Installs
- ↳ Experimental and Next Generation LMR
- ↳ Motorola Digital Radio Compatability
- Off-Topic Discussion
- ↳ Vehicle Warning Equipment Discussion
- ↳ Computer/Technical Assistance
- ↳ Knowledge Base