Page 1 of 1
help wanted MT6000E
Posted: Tue Nov 29, 2005 10:00 pm
by john g8xgs
i need help to find which rss is needed to reprogram a jedi handheld
model name is MT6000E
type is PJ502J
model no is H01RDD9AN3AN
description :-
top display,99ch uhf
same format as gp900-99/mtx838 etc
i have 3 of these believed to be ex police also believed to be the follow on from from the HT600E.
also how is the front cover removed?
is the opening catch just below the casting no?
re my post
Posted: Wed Nov 30, 2005 1:15 am
by john g8xgs
update, mtsx 6.07 says codeplug too new for application
but it will look at the radio
so which is the next versiuon to look for?
Posted: Wed Nov 30, 2005 10:08 am
by kb0nly
Do you have a picture of these radios? Just curious to see what one looks like! Never heard of the model number MT6000E.
The HT600E, which i have a UHF version of, uses the MT1000 RSS. If this radio is built on the same type of controller it's possible it uses one of the Genesis series RSS.
Posted: Wed Nov 30, 2005 10:17 am
by wavetar
I haven't heard of the MT6000E either, but suspect it likely needs MT2100 or GP900 RSS or some other overseas software...not the North American MTSX.
Todd
Posted: Wed Nov 30, 2005 6:55 pm
by Dkouz
After googling ht6000e, it apears to be a jedi.
Posted: Thu Dec 01, 2005 1:46 am
by gp900
Correct Jedi varient made specifically for some UK police forces all in UHF High. Haven't a clue as to which RSS to use, they may even have there own in which case you may be out of luck as /\/\ is unlikely to sell this due to them being specially comisioned. Have you tried MTS2000 RSS?
re rss for mt6000e
Posted: Thu Dec 01, 2005 8:37 am
by john g8xgs
i have tried mtsx6.07 it reads but says codeplug too new for varient, i have yet to try gp900-99 or any other, i will let you know in due course where i get to photos will be available for our north american friends next week
but if you take the badge of an mtx838 you would not be able to tell the difference.
Posted: Thu Dec 01, 2005 9:28 am
by tvsjr
There are later versions of MTS2000 software for Windows (CPS). I'd try that, just to see what happens.
the story unfolds
Posted: Thu Dec 15, 2005 11:06 am
by john g8xgs
when the HT600E went out of production the various uk police forces wanted somthing to replace it "at short notice" motorola looked at the situation,
it had to have 99 channals , the only hanheld available in the uk at the time was the gp900-99, enter the mt6000e
a rebadged gp900-99 = mt6000e and it uses same rss
i wonder how much more cost the mt6000e was?
Posted: Thu Dec 15, 2005 4:48 pm
by wa2zdy
Glad you were able to solve this one. Good luck with it.
Posted: Tue Jan 10, 2006 9:26 am
by Metradio
There is a version of the RSS for the MT6000E, it is GP900-99ch with support for Marconi MASC encryption - EVN4602..
Software version
Posted: Tue Apr 18, 2006 9:07 am
by stueyneumann
I am having a software issure with 6.05 and programming a HT6000e using the GP900 software. Saying the software is newer then codeplug. Any ideas or older version rss.
Posted: Tue Apr 18, 2006 9:21 am
by Metradio
Are you using MTSX RSS V6.05 and GP900 RSS ?? If so you will need the MT6000E RSS or GP900-99 RSS..
GP900
Posted: Tue Apr 18, 2006 7:58 pm
by stueyneumann
I was using the GP900 RSSand I tried the MTSX so I need the GP900-99 version ?
Posted: Wed Apr 19, 2006 3:03 am
by Metradio
Correct..