Batboard

Posted: **Wed Dec 28, 2005 12:00 am**

Hi..

Is it possible to config (Dealer Win3.11) a GP1200 with the SimpleRib interface(Max232) ?

Is the Busy signal a must just to configure it ? or is just the BUS+ signal enough (and Gnd ) ?

Cheers
Gier

Posted: **Wed Dec 28, 2005 3:29 pm**

No, the Motorola RIB needs the BUSY signal as it loops back to the computer. The radio needs the three signals to program.

Posted: **Thu Dec 29, 2005 12:08 am**

Thanks.
Ok so the Busy signal is required.. And it seems to be in the SimpleRib setup.. can the SimpleRib (Max232 , with Busy signal ) be used to program (Configure) the GP1200 ?

Batboard

GP1200 , Config Max232

GP1200 , Config Max232