ht1550 uhf
Moderator: Queue Moderator
-
- Batboard $upporter
- Posts: 336
- Joined: Sun Mar 21, 2004 8:01 pm
- What radios do you own?: APX V/7 & V/U Liberty
ht1550 uhf
Okay, I have a brand spankin new HT1550 from Moto. It is UHF and it has a "hiss" in it during receive, all channels and even when the sound is down all the way just before it would shut off.
Tried two different antennas, stub and whip. Still there.
My HT1250, with the same antennas has no "hiss" during receive like the 1550.
Tried the companding on & off no difference.
Any direction would be great.
Thanks!
Tried two different antennas, stub and whip. Still there.
My HT1250, with the same antennas has no "hiss" during receive like the 1550.
Tried the companding on & off no difference.
Any direction would be great.
Thanks!
- HLA
- Posts: 2334
- Joined: Mon Jul 11, 2005 8:15 pm
- What radios do you own?: HT1550's, X9000's, CDM1550's
if it's brand new i'd take it back and swap it out.
HLA
I never check PM's so don't bother, just email me.
I won't reply to a hotmail, gmail, aol or any other generic free address, if you want me to reply use a real address.
STOP ASKING ME FOR SOFTWARE OR FIRMWARE, I JUST FORWARD ALL OF THE REQUESTS TO THE MODERATORS
I never check PM's so don't bother, just email me.
I won't reply to a hotmail, gmail, aol or any other generic free address, if you want me to reply use a real address.
STOP ASKING ME FOR SOFTWARE OR FIRMWARE, I JUST FORWARD ALL OF THE REQUESTS TO THE MODERATORS
The dealer gave you flack on a brand new radio that was (obviously) still in warranty?Nexrad16 wrote:Motorola replaced the radio without question on the second go around. Of course I had to write/submit a letter that explained the liability that the dealer as well as Moto might be exposed to if the radio failed and it was known to have a problem.
Good luck!
I suppose it's hit or miss with some of these shops, but if it were me I would have just sent the radio back to /\/\ right off the bat and given you a loaner til it got backNexrad16 wrote:Yes, they attempted a repair and that did not work. After that they replaced it. Seems that it should have been replace the first time but it is very difficult to "force" any large company to do the right thing the first time.
