Batboard

Posted: **Sat Feb 25, 2006 4:46 am**

i am putting in 60" of the sho me light by the inch into the tailgate of my 2000 F150. the center 8 sections are going to be TD (amber), and i want to use the 4 outer sections (red) for additional stop, turn, and tail. my plan is to use 1 section on each side for tail and 1 section for stop/ turn.

my question is whats the law on tail light brightness compared to stop/ turn brightness. second question is if i have to make the tail light section less bright than the stop/ turn section, how do i do that?

thanks
-zach

Posted: **Sun Feb 26, 2006 8:42 pm**

...and you live where? Local DOT people will know this, or DMV...

Posted: **Sun Feb 26, 2006 9:15 pm**

Posted: **Mon Feb 27, 2006 8:59 am**

http://www.revisor.leg.state.mn.us/stats/

Posted: **Mon Feb 27, 2006 2:33 pm**

get some whelen 500 series stop turn tails you are all set

Posted: **Mon Feb 27, 2006 3:37 pm**

Discussions regarding legalities of lights, usages, and different state laws and regulations regarding warning equipment are not permitted. See the announcement inside the forum for more details

I am locking this topic for the above reason. This is a message board - not where you find legal advice.

Ask your police department, state DOT, or other offical source of information.

-Alex