Pinouts GM1200E Please Help!

river · Post by **river** » Sun Mar 26, 2006 6:40 am

Hi! I have GM1200E series radio and can`t read the radio with RIB// I made pinouts from Batlabs // but i can`t understood whatt i do wrong!! Please help!

Thanks!

montegrande · Post by **montegrande** » Sun Mar 26, 2006 8:40 am

I have Gm1200 and i use sw DPS v 1.15 and work! With other sw version don't work....

I have another problem... conventional chanel have a time out timer and i can not disable it ( is a TT timers in network configuration (min 0 sec max 60 sec))!!!!

Can you help me?

Max

river · Post by **river** » Sun Mar 26, 2006 9:04 am

montegrande hi!

Possibly ТТ no more than 60 it is feature of the given software! At you what station 1200 or 1200Е? In mine software as same

I`m use this Win 95/NT R00.01.05
and MPT CPS R00.02.14 and can`t read the radio codeplug

river · Post by **river** » Sun Mar 26, 2006 9:08 am

I program the first time GM1200. I basically program Visar, GP1200, GP300, GP300 5t, and same....

Post by **wavetar** » Sun Mar 26, 2006 10:35 am

Make sure you have the RJ45 plug correct...many times people don't realize the small print in Batlabs picture which says "locking tab on top", and they wire the pins backwards.

Todd

river · Post by **river** » Sun Mar 26, 2006 10:58 am

Todd Hi!

oops!... ? That is you wish to tell that I have mixed pins RJ45 on the contrary? And if I shall try to make on the contrary I nothing damage?

river · Post by **river** » Sun Mar 26, 2006 12:09 pm

i do invert pinouts! and nothing changes! radio not respond!

river · Post by **river** » Fri Mar 31, 2006 2:30 pm

I still can`t read the radio.... look like the 1200E is unprogrammable reciver!

Yobbo · Post by **Yobbo** » Mon Apr 03, 2006 4:53 pm

This worked for with the Australian version of the GM1200E, use a GM950 lead and make sure you use the GM1200E software the GM1200 is a completely diffrent radio (here in Australia) worked for me cheers Yobbo

river · Post by **river** » Tue Apr 04, 2006 10:51 am

OK!// How you connect station? GM1200E?
how connect the bridges and pinouts?

Thank you!

river · Post by **river** » Sat Apr 08, 2006 1:06 pm

Help !!! GM1200E can`t read!!

BOFH · Post by **BOFH** » Thu Apr 20, 2006 11:34 pm

Hmm, a little phrase comes to mind here.

Sierra Tango Foxtrot Uniform.

river · Post by **river** » Tue May 30, 2006 1:14 am

//

GM1200E - is unprogrammable stantion!!!

motoblaster · Post by **motoblaster** » Tue Jun 13, 2006 7:09 am

hey man, is the same cable to read gm600, good luck, i do it and work fine with the standard rib ( no modified).

river · Post by **river** » Thu Sep 07, 2006 3:26 am

gm600 cable not work on gm1200e

river · Post by **river** » Tue Sep 19, 2006 1:31 pm

Yes! I have won it...

Pinouts GM1200E Please Help!

Pinouts GM1200E Please Help!

Wrong