mt2000 rss or cps?

This forum is for discussions regarding all aspects of Motorola radio programming, including hardware, computers, installation and use of RSS/CPS, firmware upgrades, and troubleshooting. There are subforums for discussions of codeplugs, and also for software/firmware release notes and issues.

Moderator: Queue Moderator

Post Reply
bayfire300
Posts: 348
Joined: Tue May 17, 2005 5:19 pm

mt2000 rss or cps?

Post by bayfire300 »

hi can an mt-2000 be programmed w/ cps or just rss

after turning radio i hit the last button down from the top before the ptt button 5 times its tells you the codeplug version .mine read r02.13 is that a cps version?
my rss version is r06.00.00 and wont read radio.says code plug to old for this application.
thanks
otto
Top
User avatar
RESCUE161
Batboard $upporter
Posts: 2062
Joined: Wed Jan 16, 2002 4:00 pm
What radios do you own?: Too many!

Post by RESCUE161 »

RSS. There is no CPS for this radio.
Scott
KE4FHH
Religion: Kills folks dead!
Top
User avatar
wavetar
Administrator
Posts: 7341
Joined: Sun Sep 09, 2001 4:00 pm

Post by wavetar »

The 2.13 you see in the screen is the internal firmware version of the radio, and doesn't have anything to do with the RSS version it was last programmed with. RSS version 6.00.00 is quite old...circa 1998 to be more precise, so the chances are very good that any radio you pick-up is going to have been programmed with a newer version. 6.08.00 is the latest, but 6.07.00 should be ok for 99% of what's available out there.

Todd
No trees were harmed in the posting of this message...however an extraordinarily large number of electrons were horribly inconvenienced.

Welcome to the /\/\achine.
Top
bayfire300
Posts: 348
Joined: Tue May 17, 2005 5:19 pm

Post by bayfire300 »

oh ok i understand now thanks alot guys

otto
Top
Post Reply

Return to “Radio Programming”