MTS2000 Model Help

Vercomm · Post by **Vercomm** » Fri May 19, 2006 11:51 am

Hello,

Wondering if anybody can tell me if the following model of UHF MTS2000 will do plain old conventional.

H01RDD9PW1BN

Also will they do 12.5KHz

Thanks,

Jamie

Will · Post by **Will** » Fri May 19, 2006 2:20 pm

UHF, 403 470, 4 watt Std display, 12.5/25/30k spac pgmbl

Portable System Type = Programable
Basic Programable

from the chart here http://batlabs.enterzone.net/images/mtsxmod.gif

AEC · Post by **AEC** » Tue May 23, 2006 8:13 am

This is what the service manual shows your radio as:

1. H01: portable/model series

2. R: 438-482 Mhz.

3. D: 4.0-5.0 Watts

4. D: Standard control with display

5. 9: Programmable channel spacing

6. P: Programmable primary operation

7. W: Programmable primary system type

8. 1: Basic Feature level

9. B: Version

10. N: Standard package

So yes, you can do 12.5 Khz. channel spacing, and probably 6.25 as well.

HLA · Post by **HLA** » Tue May 23, 2006 9:35 am

how old is the firmware, even tho the model number says it will do 12.5, older firmware won't take some frequencies.

AEC · Post by **AEC** » Tue May 23, 2006 1:33 pm

'BN' series Jedis should all be capable of 12.5 Khz. channel spacing, the earlier 'AN' series might not though.

Even my old 'BN' series HT1000 does 12.5 Khz, so I'mn quite certain his radio should be able to as well.