Page 1 of 1
MTS2000 Model Help
Posted: Fri May 19, 2006 11:51 am
by Vercomm
Hello,
Wondering if anybody can tell me if the following model of UHF MTS2000 will do plain old conventional.
H01RDD9PW1BN
Also will they do 12.5KHz
Thanks,
Jamie
Posted: Fri May 19, 2006 2:20 pm
by Will
UHF, 403 470, 4 watt Std display, 12.5/25/30k spac pgmbl
Portable System Type = Programable
Basic Programable
from the chart here
http://batlabs.enterzone.net/images/mtsxmod.gif
Posted: Tue May 23, 2006 8:13 am
by AEC
This is what the service manual shows your radio as:
1. H01: portable/model series
2. R: 438-482 Mhz.
3. D: 4.0-5.0 Watts
4. D: Standard control with display
5. 9: Programmable channel spacing
6. P: Programmable primary operation
7. W: Programmable primary system type
8. 1: Basic Feature level
9. B: Version
10. N: Standard package
So yes, you can do 12.5 Khz. channel spacing, and probably 6.25 as well.
Posted: Tue May 23, 2006 9:35 am
by HLA
how old is the firmware, even tho the model number says it will do 12.5, older firmware won't take some frequencies.
Posted: Tue May 23, 2006 1:33 pm
by AEC
'BN' series Jedis should all be capable of 12.5 Khz. channel spacing, the earlier 'AN' series might not though.
Even my old 'BN' series HT1000 does 12.5 Khz, so I'mn quite certain his radio should be able to as well.
