Pin-out XTS/Jedi to SyTech RIOS
Posted: Wed Jun 14, 2006 4:09 am
One of my customers recently bought a SyTech RIOS, but didn't get any additional cables for it besides the ones that went to their installed mobiles. I made up some to work with an XTS or Jedi using the cable from an NMN6191 spkr mic.
DB26 (Male) to radio universal conn
2 spkr high to 2 (Yellow)
3 mic high to 3 (Blue)
11 PTT to 5 (Orange)
13&15 GND to 1&8 (Red)
20 mic low to 6 (Brown)
Besides the Ground jumper between 15 & 13, you also need to jumper 10 to 14, and 22 to 24
The colors refer to the /\/\ stock NMN6191/93.
Hope this helps someone somewhere.
DB26 (Male) to radio universal conn
2 spkr high to 2 (Yellow)
3 mic high to 3 (Blue)
11 PTT to 5 (Orange)
13&15 GND to 1&8 (Red)
20 mic low to 6 (Brown)
Besides the Ground jumper between 15 & 13, you also need to jumper 10 to 14, and 22 to 24
The colors refer to the /\/\ stock NMN6191/93.
Hope this helps someone somewhere.