Page 1 of 1
help programming Gp680
Posted: Wed Jul 12, 2006 10:39 am
by albe01
Hi, I would want to program the transmitter-receiver but I do not find the program adapted, I have a program much old one, even if program the frequencies the radio does not transmit, I have only menus status, add contact, delete contact. I would have to only program 6 channels for amateur radio operator bridges but I do not succeed.
Thanks
Posted: Wed Jul 12, 2006 3:41 pm
by JAYMZ
Sounds like you need to call Motorola and buy the latest software.
Posted: Wed Jul 12, 2006 11:31 pm
by Andreas
If you can read and write the radio without any errormessage,the RSS is ok.You have to fill in the frequencies and set to "repeater talkaround".
After programming,you have to set the radio to conventional mode.
Another way is to flash the radio to GP380 and the radio will do up to 250 channels and select-5 and single tone call (to open a repeater).
You can find much more informations about all on my homepage.
Use the Email address on my homepage for replies.
Andreas
Posted: Thu Jul 13, 2006 12:05 am
by albe01
The program not errors, but I do not trust myself to program it to gp380, I would not want to damage the radio, and I do not know not even where to find the necessary one. i have only rib rln4008 and the cable.
radio ver.no:R.02.00.22
mdh25rdh9ck6ae I using motorola cps software R00.02.10, 29May 2001
(sorry for my bad english)
I'd' like programming the radio only for this amateur frequncy,
Ch1: rx 430150 tx431750
Ch2: rx 430175 tx431775
ch3 rtx 433075
???
on display i have only status menu, contact list, the other menu' are missing
help!
Posted: Thu Jul 13, 2006 2:10 am
by albe01
albe01 wrote:The program not errors, but I do not trust myself to program it to gp380, I would not want to damage the radio, and I do not know not even where to find the necessary one. i have only rib rln4008 and the cable.
radio ver.no:R.02.00.22
mdh25rdh9ck6ae I using motorola cps software R00.02.10, 29May 2001
(sorry for my bad english)
I'd' like programming the radio only for this amateur frequncy,
Ch1: rx 430150 tx431750
Ch2: rx 430175 tx431775
ch3 rtx 433075
???
on display i have only status menu, contact list, the other menu' are missing
help!
i not have found conventional mode and personality selection menu'!