Minitor on/off duty

[MetroMan]

Just tried programming a Minitor IV VHF dual freq pager for off duty with vibe and PTL (Opt 14) in position D and it refuses to enable the off duty function. If I program pos 'B' with off duty all is fine.

Setup is A - alert monitor all tones B- monitor F1 with alert C - scan F1/F2 and D - off duty/vibe/PTL. Won't do off duty.

Running V 1.8.1 Minitor 3/4 software. Programmed hundreds of these and never ran into this issue before.

[MetroMan]

OK. Don't believe eve rything you hear and only half of what you see!

Programmed pager anyway and OFF DUTY does work. However, when you read it the on/off duty section is grayed out making it look like it won't work.