Batboard

Just tried programming a Minitor IV VHF dual freq pager for off duty with vibe and PTL (Opt 14) in position D and it refuses to enable the off duty function. If I program pos 'B' with off duty all is fine.

Setup is A - alert monitor all tones B- monitor F1 with alert C - scan F1/F2 and D - off duty/vibe/PTL. Won't do off duty.

Running V 1.8.1 Minitor 3/4 software. Programmed hundreds of these and never ran into this issue before.

OK. Don't believe eve rything you hear and only half of what you see!

Programmed pager anyway and OFF DUTY does work. However, when you read it the on/off duty section is grayed out making it look like it won't work.