Page 1 of 1
Another lame astro saber question.......
Posted: Wed Aug 02, 2006 4:59 pm
by saberjerk
This may seem pretty obvious to most but will a standard saber public
service mic work on the astro digital saber? Hopefuly without frying something?
Thanks
Posted: Wed Aug 02, 2006 5:16 pm
by jnglmassiv
It won't work. The non-pub safety ones will, though.
Posted: Wed Aug 02, 2006 6:21 pm
by saberjerk
ok, well maybe I don't know what I have here. The mics are NMN6128B
Will these work?
Posted: Wed Aug 02, 2006 6:37 pm
by jnglmassiv
I'm not up with the model numbers but if an antenna can be screwed to the mic, it won't work.
Posted: Wed Aug 02, 2006 7:02 pm
by saberjerk
These don't have the antenna. So I guess these should work.
Thanks a lot guys.
AS Speaker/Mic
Posted: Thu Aug 03, 2006 5:06 am
by Tom in D.C.
The speaker/mic will work fine. However, you must change the
antenna extender for the top of the radio to the reverse SMA
type as used by Motorola. If you have the part you just unscrew
the original Saber adapter and screw on the SMA adapter for the
Astro Saber antenna. If your speaker/mic is missing the thingie
that extends the antenna then you just use the same antenna
arrangement as when you're not using the speaker/mic.