CDM1250 'Channel Incorrectly Saved On Power Off' ?

The General forum is where users can discuss any topic regarding Motorola communications equipment - hardware, software, etc. There are also several focused forums on this board, so please take the time to ensure that your questions doesn't fall into one of those categories before posting here!

Moderator: Queue Moderator

Post Reply
STicKman
Posts: 56
Joined: Sun Feb 03, 2002 4:00 pm

CDM1250 'Channel Incorrectly Saved On Power Off' ?

Post by STicKman »

Since upgrading firmware to R05.05.17 from R05.05.10, some of the units will not remain on the channel set before power off, when powered back on. There appears to be no set pattern, but one radio prefers Channel 2 and the other Channel 12. These CDM's have been in service for over 5+ years and we have attempted to keep the Firmware updated throughout this time.
Top
Post Reply

Return to “General Motorola Solutions & Legacy Radio Discussion”