HT1000 channel programming

albfelix · Post by **albfelix** » Thu Sep 14, 2006 3:22 pm

Hi guys,

I am knw into radio programming and this might sound a stupid question. I have a 16 channel UHF Motorola HT1000 radio and the cable and also the pc. How do I program the channels? This might have been answered on previous post. Can someone please be kind and answer me?

Thanks

601 · Post by **601** » Thu Sep 14, 2006 3:39 pm

You need RSS (Radio Service Software), licensed from Motorola and a RIB, and you're set to go!

albfelix · Post by **albfelix** » Thu Sep 14, 2006 3:41 pm

i do have them all, i just need the key strokes entries.

MotoMax300 · Post by **MotoMax300** » Thu Sep 14, 2006 6:18 pm

Open RSS in DOS, F3 - F3 - F10 - F4 - F5 then type them in.

albfelix · Post by **albfelix** » Thu Sep 14, 2006 6:20 pm

thanks, i will try it tomorrow at work since i have the old pc there and will let you know

MotoMax300 · Post by **MotoMax300** » Thu Sep 14, 2006 6:22 pm

You know, I am probably a little off.

Serious note though, look at the screen when you open the program, connect the rib, then select GET CODEPLUG / READ, READ RADIO, Then Exit that screen by F10, then F4 Modify Current, F5 channel / mode configuration.

albfelix · Post by **albfelix** » Thu Sep 14, 2006 6:36 pm

thanks

albfelix · Post by **albfelix** » Fri Sep 15, 2006 9:19 am

thanks, it works even with a ribless cable on windows 98

HLA · Post by **HLA** » Fri Sep 15, 2006 9:37 am

you don't realize how lucky you got that it worked in 98 but you need to take everyones advice and do it in real dos from now on before you turn that radio into a doorstop.

CTAMontrose · Post by **CTAMontrose** » Fri Sep 15, 2006 9:53 am

my buddy learned the lesson of a ribless cable too on his XTS3000 when he got "FL 01/82" once.

fortunatly i had a saved good codeplug and was able to get the radio recovered.

albfelix · Post by **albfelix** » Fri Sep 15, 2006 2:20 pm

i have been playing with both radios for a while now and no problem so far, i am crossing my fingers

albfelix · Post by **albfelix** » Fri Sep 15, 2006 2:21 pm

i was hoping also to program them to listen to nypd, but all the frequencies that NYPD uses are around 476MHz