Power up alert tone

This forum is for discussions regarding all aspects of Motorola radio programming, including hardware, computers, installation and use of RSS/CPS, firmware upgrades, and troubleshooting. There are subforums for discussions of codeplugs, and also for software/firmware release notes and issues.

Moderator: Queue Moderator

Post Reply
Jenik
Posts: 2
Joined: Wed Sep 20, 2006 9:47 am

Power up alert tone

Post by Jenik »

Hi,
I bought HT600E UK ex-police with UK GEN. I made RIB with MAX232 and
tried add one PMR channel. Everything works fine but radio dont beep
on boot. Before reprograming did it. In RSS is this feature enabled. When I upload old codeplug PMR channel disappeared but radio allways not beep :( I'm using MT1000 RSS R03.01.00.
Anyone knows where I make mistake?
Thanks
Top
k2hz
Posts: 532
Joined: Tue Mar 01, 2005 7:27 am

Post by k2hz »

On the Change/Per-Radio screen:

"Power Up Alert Tone" should be ENABLED
Top
Jenik
Posts: 2
Joined: Wed Sep 20, 2006 9:47 am

Post by Jenik »

k2hz wrote:On the Change/Per-Radio screen:

"Power Up Alert Tone" should be ENABLED
It is enabled and radio don't beep on boot.
Top
Post Reply

Return to “Radio Programming”