Another strange issue with CDM1250 UHF

mmb · Post by **mmb** » Thu Oct 26, 2006 7:09 am

I've programmed in a second zone & added the 9 channels to the zone but when I try & manually step through them the radio only remains on the one channel? The channels show up as being in the scan list, in the zone, and they are listed under conventional channels?

Post by **escomm** » Thu Oct 26, 2006 7:36 am

Did you change zones?

mmb · Post by **mmb** » Thu Oct 26, 2006 8:21 am

Yes, I used the select button & changed to zone 2 but only 1 channel shows up, when I try to scroll through them it hangs on the one channel?

jackhackett · Post by **jackhackett** » Thu Oct 26, 2006 10:28 am

I've never seen anything like that, have you read the radio back in and verified that it took the programming correctly?

mmb · Post by **mmb** » Thu Oct 26, 2006 1:41 pm

Yep, and they will show up in a scan list but I keep getting "list full" no matter what I do?

HLA · Post by **HLA** » Thu Oct 26, 2006 2:59 pm

you can email me the codeplug and i'll look at it.

Post by **radioman202** » Sat Nov 11, 2006 4:10 pm

go to the channel setup and you will uncheck the box that says your using a option board, you will find its checked in channel 1

Another strange issue with CDM1250 UHF

Another strange issue with CDM1250 UHF

simple fix