Page 1 of 1
Another strange issue with CDM1250 UHF
Posted: Thu Oct 26, 2006 7:09 am
by mmb
I've programmed in a second zone & added the 9 channels to the zone but when I try & manually step through them the radio only remains on the one channel? The channels show up as being in the scan list, in the zone, and they are listed under conventional channels?
Posted: Thu Oct 26, 2006 7:36 am
by escomm
Did you change zones?
Posted: Thu Oct 26, 2006 8:21 am
by mmb
Yes, I used the select button & changed to zone 2 but only 1 channel shows up, when I try to scroll through them it hangs on the one channel?
Posted: Thu Oct 26, 2006 10:28 am
by jackhackett
I've never seen anything like that, have you read the radio back in and verified that it took the programming correctly?
Posted: Thu Oct 26, 2006 1:41 pm
by mmb
Yep, and they will show up in a scan list but I keep getting "list full" no matter what I do?
Posted: Thu Oct 26, 2006 2:59 pm
by HLA
you can email me the codeplug and i'll look at it.
simple fix
Posted: Sat Nov 11, 2006 4:10 pm
by radioman202
go to the channel setup and you will uncheck the box that says your using a option board, you will find its checked in channel 1