Jedi transformer use with waris

JRUTA · Post by **JRUTA** » Sat Nov 25, 2006 11:07 am

I have a waris charger I would like to use, but do not have the transformer- I DO have a jedi transformer, can I mix them?

Wes · Post by **Wes** » Sat Nov 25, 2006 3:07 pm

If you have the jedi rapid charger power supply it will work fine on the waris rapid charger.

JRUTA · Post by **JRUTA** » Sat Nov 25, 2006 7:11 pm

tHANX SO MUCH

Post by **wavetar** » Sun Nov 26, 2006 11:00 am

The Waris adaptor is 18 volts, but the Jedi adaptor is only 13.8. I have had customers bring their chargers in because the red light would begin blinking within a few minutes of a bettery being inserted. It turned out they had mixed up their Jedi adaptors with the Waris chargers. I have also seen where it doesn't seem to cause any issues, but it'd be best to use the proper adaptor.

Todd

radio-link · Post by **radio-link** » Thu Nov 30, 2006 11:39 am

wavetar wrote:The Waris adaptor is 18 volts, but the Jedi adaptor is only 13.8. I have had customers bring their chargers in because the red light would begin blinking within a few minutes of a bettery being inserted. It turned out they had mixed up their Jedi adaptors with the Waris chargers. I have also seen where it doesn't seem to cause any issues, but it'd be best to use the proper adaptor.

Todd

ACK. I was told and was able to confirm, that a waris charger with a jedi transformer usually stops charging to early, bringing on the green LED, but the battery has 20% charge or so.
15V are OK for both chargers, when traveling I use a small adjustable switched power supply, always set to 15V, to be used with both chargers.

JRUTA · Post by **JRUTA** » Thu Nov 30, 2006 5:30 pm

Thanx for the additional info, I just paired them tonight- as I don't have a waris transformer available.

I'm usisng a lithium Ion battery, I'll see whay happens.........
-J