As the title says - need the pinouts for the pink 14-84556B10 siren connector for a SyntorX radio. I've got several with "zip cord" wiring coming from pins 8 and 11 and the leads have been cut, don't have a service manual for the siren unit available.
Thanks in advance for any assistance!
Darrell
SyntorX Pink siren connector pinouts needed
Moderator: Queue Moderator
Here are the plug pinouts for the pink plug:
6- Horn transfer relay A-
19- " " " A+
4- A+
5- A+
22- A-
10- A-
11- Foot switch
8 - Foot switch (override sw)
16 - To PA amp box (A+)
18 - " " " " (Pwr amp relay control)
13 - " " " " (Filtered A+)
12 - " " " " (Pwr amp audio HI)
2 - " " " " (Pwr amp audio LO)
1 - " " " " (GND)
20- To radio control head speaker LO
9 - To radio control head speaker HI
I am sure you know this, but there are no siren electronics in the System 90*S siren control board, you need the separate amp box...
6- Horn transfer relay A-
19- " " " A+
4- A+
5- A+
22- A-
10- A-
11- Foot switch
8 - Foot switch (override sw)
16 - To PA amp box (A+)
18 - " " " " (Pwr amp relay control)
13 - " " " " (Filtered A+)
12 - " " " " (Pwr amp audio HI)
2 - " " " " (Pwr amp audio LO)
1 - " " " " (GND)
20- To radio control head speaker LO
9 - To radio control head speaker HI
I am sure you know this, but there are no siren electronics in the System 90*S siren control board, you need the separate amp box...