Batboard

Posted: **Mon Nov 27, 2006 2:26 pm**

Hi Group,

I have a number of Motorola SmartRIB's at the shop I work at that are all bad.

Bad meaning that when plugged in and turned on, I get no power light.

I've confirmed the cables I'm using to test are good.

I'm guessing that "technicians" prior to my arrival probably used the wrong cables for things like High-Power Spectra mobiles, etc.

Is there a common failure point in the SmartRIB related to incorrect cable usage or anything similar?

Is there anything I can do to repair these?

Thanks!

Posted: **Mon Nov 27, 2006 2:39 pm**

d119, please check your PM's. Sent a PM to you back on Nov 21st and it still shows as unread. Thanks!

Posted: **Mon Nov 27, 2006 2:41 pm**

d119
Is it possible they used wrong power transformer on the smartrib.
If memory serves me right I believe the polarities on the power connector are different from the standard rib to a smartrib.
Doug

Posted: **Mon Nov 27, 2006 4:37 pm**

OK, Whats the fix?

Posted: **Mon Nov 27, 2006 7:35 pm**

the transformer for the smartrib is 12v and the center pin is negative.

Posted: **Mon Nov 27, 2006 9:43 pm**

Thats fine - I have the correct power adapter.

The units still don't power on.

Thoughts?

Batboard

Common failure point on SmartRIB's?

Common failure point on SmartRIB's?

Please check your PM's