Page 1 of 1
GP-2000 DTMF stopped working?
Posted: Tue Dec 05, 2006 9:01 am
by kato56
When transmitting and manually pressing a digit on the front panel. the DTMF tones are not being transmitted. This used to work... Did I somehow disable this feature in the programming somehow without knowing?
Thanks
Posted: Tue Dec 05, 2006 9:11 am
by HLA
how can anyone answer that without seeing or knowing what you altered in it? we need alot more info.
Posted: Tue Dec 05, 2006 9:41 am
by kato56
The manual DTMF should normally always work on transmit, I don't have it tied to any sort of signaling, PTT-ID, etc. Like my Jedi radios, I have the ability to either enable the dtmf in each personality, but since I hardly use this radio, I can't remember if the dtmf generation was tied to another option that I might have turned off recently.
GP-2000 dtmf problem - resolved
Posted: Tue Dec 05, 2006 12:13 pm
by kato56
I found out what the problem was.
I found the "dtmf tx tone duration" set to 25 milliseconds. Should have been around 200 ms or more.