Page 1 of 1
Maxtrac Problem
Posted: Tue Dec 19, 2006 2:27 pm
by Two Tone
Ive got a moto maxtrac that wont transmit and the RX/TX light blinks as if it was RX but there is nothing being recieved. The rest of the audio works. Any ideas?
Posted: Tue Dec 19, 2006 2:36 pm
by emsbuff3240
are you sure you have the PLs set right?
Posted: Tue Dec 19, 2006 2:52 pm
by Two Tone
No PL's on any freq
Posted: Tue Dec 19, 2006 5:03 pm
by Max-trac
You may have more than one problem.
What does it do if you hold the monitor button in for several seconds?
Posted: Tue Dec 19, 2006 5:46 pm
by KE7DZZ
Is it UHF model in the 449-470 split? If so are you trying to use in on ham freqs? If that is the case you will need to do a simple realignment of the radio. Look
here.
Posted: Thu Dec 21, 2006 12:52 pm
by oldfan49
Check your programming to be sure busy channel lockout is not turned on
Posted: Thu Dec 21, 2006 1:46 pm
by meech
As far as the light flashing, is it too close to your PC.