JT1000 programming error message

This forum is for discussions regarding all aspects of Motorola radio programming, including hardware, computers, installation and use of RSS/CPS, firmware upgrades, and troubleshooting. There are subforums for discussions of codeplugs, and also for software/firmware release notes and issues.

Moderator: Queue Moderator

Post Reply
User avatar
W4KRR
Posts: 254
Joined: Tue Oct 08, 2002 5:18 am
What radios do you own?: XTS3000's; XTS2500's; many sca

JT1000 programming error message

Post by W4KRR »

RSS version R03.00.00. I can read the codeplug with no problems. When I modify/change the frequencies, settings, etc. and try to load them up to the radio, I get this message: "Workspace and Radio Software do Not Conform!!!!" Then "Press any Key to Continue". This occurs even if I try to load the unmodified codeplug that came from the radio back into it. I can make changes from the keypad of the radio, and the RSS will read them with no problem, but I cannot send it back into the radio.
Ken, W4KRR
Top
Post Reply

Return to “Radio Programming”