GM 338 base station

The General forum is where users can discuss any topic regarding Motorola communications equipment - hardware, software, etc. There are also several focused forums on this board, so please take the time to ensure that your questions doesn't fall into one of those categories before posting here!

Moderator: Queue Moderator

Post Reply
avernus99
Posts: 11
Joined: Tue May 02, 2006 6:59 pm

GM 338 base station

Post by avernus99 »

hi guys...
I have GM 338 mobile radio with a good power supply.When it transmits,most of the GP 328 walkie talkie's receive intermittent transmission.The coverage distance is less than 2 KM.Is there anyway I can enhance the performance of this GM 338 radio in the software configuration?
I have checked power supply is ok and tested GM 338 using communication analyzer.Transmit power output is 38W.
Top
Rocky Coast
Posts: 2
Joined: Sun May 14, 2006 3:55 am

Re: GM 338 base station

Post by Rocky Coast »

avernus99 wrote:hi guys...
I have GM 338 mobile radio with a good power supply.When it transmits,most of the GP 328 walkie talkie's receive intermittent transmission.The coverage distance is less than 2 KM.Is there anyway I can enhance the performance of this GM 338 radio in the software configuration?
I have checked power supply is ok and tested GM 338 using communication analyzer.Transmit power output is 38W.
What are you using for an antenna?
How high is it?
What type of cable are you using from
the radio to the antenna?
Top
Post Reply

Return to “General Motorola Solutions & Legacy Radio Discussion”