OT: Zetron 4010 QC Tones

arlojanis · Post by **arlojanis** » Sun Feb 18, 2007 1:10 pm

I can program standard QC II tones in a Zetron 4010. How do I program a call that uses tone A in one group and tone B from another group?

RFguy · Post by **RFguy** » Sun Feb 18, 2007 2:15 pm

Program as Motorola 1000 call. Need to pick a Motorola paln that has both group 1 and 2. I believe that it will be a 4-digit entry (first digit is a leading digit, then 3 digit pager code).

arlojanis · Post by **arlojanis** » Tue Feb 20, 2007 1:47 pm

It sounds like if I go to the 1000 call, I will have to reprogram all of the existing Group 1 calls. The new call is from Group 2 and Group 5. Can I do a custom call for just the new one?

MassFD · Post by **MassFD** » Tue Feb 20, 2007 4:42 pm

You can do it as a custom call if that option was purchased from Zetron. Do you now have any custom calls on the system?

In our 4010's Zetron used leading digit 9 for group calls so the first custom call is 9001.

Look in the paging setup and see if custom is there.

RFguy · Post by **RFguy** » Tue Feb 20, 2007 5:08 pm

If you go to an unused leading digit (9 for example) and set it for Motorola 1000 call "D" plan.
You can then send a page to group 2 and 5 (A tone group 2, B tone group 5) by entering 98xx (xx is the last 2 digits of the pager code).

If you are using group 1, then you can still enter 1xx (xx is the last 2 digits of the pager code) to page a group 1 pager.

arlojanis · Post by **arlojanis** » Wed Feb 21, 2007 6:26 am

I want to program a button for the odd call. I will not be using the keyboard. Does this effect the way I program to get the odd call?

RFguy · Post by **RFguy** » Wed Feb 21, 2007 6:33 am

Do you presently have buttons assigned to pager calls? If so, then you have the required "Instant Call" option.

Just follow the info that I gave previously to set up the pager group.

Then assign a button as Instant call, tie it to the proper channel, enter the pager code. Thats it.