MTS 2000 MODEL3 VHF CODEPLUG NEEDED OR TECHNICAL HELP

policek-9 · Post by **policek-9** » Wed Feb 21, 2007 3:41 pm

I think I need a new codeplug. When I power my MTS2000 on it completes the self test and shows the name for channel 1 on the screen. After about 5 secounds it switches on the screen from channel 1 to channel 3 on it own.
Model H01KDH9PW1BN
R05.41

HLA · Post by **HLA** » Wed Feb 21, 2007 4:08 pm

are you shure you don't have a button sticking?

policek-9 · Post by **policek-9** » Wed Feb 21, 2007 4:41 pm

I dont think so i checked all of them. It is weird I have never seen a radio do this before. It passes the self test, But no matter what channel you have it on it is right for the first 5 seconds then it switches to a different channel on the screen without moving the channel knob. It also transmits and recieves on the channel displayed on the screen not the channel selected. You can move the channel knob back to channel 1 and it will transmit and recieve on channel 3 and show channel 3's info on the screen. But when you put it on channel 3 it is right and doesnt change after 5 seconds.

Post by **escomm** » Wed Feb 21, 2007 4:49 pm

policek-9 · Post by **policek-9** » Wed Feb 21, 2007 5:51 pm

What does the caps lock key have to do with my post?

Post by **alex** » Wed Feb 21, 2007 6:05 pm

It is rude to type your posts in all caps. Please refrain from doing so.

-Alex

policek-9 · Post by **policek-9** » Wed Feb 21, 2007 6:08 pm

Sorry I didnt know it was rude to type in all caps.

will_545 · Post by **will_545** » Wed Feb 21, 2007 6:17 pm

Caps is for when you want to yell. Fyi

policek-9 · Post by **policek-9** » Wed Feb 21, 2007 6:44 pm

I appreciate everyones help with my typing skills but I really need some help with my radio.

Ed · Post by Ed » Fri Feb 23, 2007 6:07 am

Broken channel-selector/rotary.

Ed

Post by **wavetar** » Fri Feb 23, 2007 8:46 am

Put your radio into test mode & check the buttons/switches. To do this, turn on the radio & wait for the 'self test' to clear. Then press the bottom side button 5 times (there is a 10 second time-out if you're too slow). The radio will enter test mode & start displaying the model number, serial number, flashcode, etc. Press the blue side button to enter into 'button test' mode. Every button & switch position will have a corresponding numeric value on the screen. Check to make sure your A-B-C toggle switch & channel selector switch are good (no repeat or missing numeric values).

Todd